System DELTA 30 - Modular furnishing system – Fume cupboard systems - experiment well in safety (for sure)
One of the most important pieces of safety equipment in laboratories is the fume cupboard.
In order to fulfill the protective function, and thus the maintenance of occupational safety, the exhaust air volume flow is a decisive criterion. The retention of pollutants inside the fume cupboard and the resistance to external air currents that can interfere with the fume cupboard is highly dependent on the extraction volume. The further the sash is opened, the more the retention capacity of the fume cupboard is impaired.
Based on these considerations, DIN EN 14175 requires not only the static, but also the dynamic behaviour in the “robustness test” as proof. This simulates a disturbing movement in the room, in order to be able to evaluate the stability of the inflow and the retention potential of the fume cupboard. The DELTA 30 fume cupboards, with the extensive range of variants, meet the requirements of the DIN EN 14175 in in full with the best values. The exhaust system has optimized suction zones in the rear wall, which are easily disassembled for cleaning purposes, ensuring ideal air flow and ventilation. The interior of the fume cupboard is extensively usable. There are no disturbing built-in components. Optimal usage and maximum occupational safety – the evaluation factors for our fume cupboards.
In order to fulfill the protective function, and thus the maintenance of occupational safety, the exhaust air volume flow is a decisive criterion. The retention of pollutants inside the fume cupboard and the resistance to external air currents that can interfere with the fume cupboard is highly dependent on the extraction volume. The further the sash is opened, the more the retention capacity of the fume cupboard is impaired.
Based on these considerations, DIN EN 14175 requires not only the static, but also the dynamic behaviour in the “robustness test” as proof. This simulates a disturbing movement in the room, in order to be able to evaluate the stability of the inflow and the retention potential of the fume cupboard. The DELTA 30 fume cupboards, with the extensive range of variants, meet the requirements of the DIN EN 14175 in in full with the best values. The exhaust system has optimized suction zones in the rear wall, which are easily disassembled for cleaning purposes, ensuring ideal air flow and ventilation. The interior of the fume cupboard is extensively usable. There are no disturbing built-in components. Optimal usage and maximum occupational safety – the evaluation factors for our fume cupboards.
- DELTAguard bench-mounted fume cupboard
- DELTAguard low ceiling bench-mounted fume cupboard
- DELTAguard Low-level fume cupboard
- DELTAguard Walk-in fume cupboard
- DELTAguard Filter fume cupboard
- DELTAguard Radionuclide fume cupboard
- DELTAguard High-performance fume cupboard
- DELTAcare fume cupboard
- DELTAguard Ex-fume cupboard
- Special equipment
- DELTAbigbox
- Air Barrier Efficiency
- Weighing containment
- Enclosures
- Chemical disposal
- Disposal unit substructure
- Spot extraction
- DELTAguard PROTECT
- DELTAcontrol
Disposal unit substructure - solvent disposal, customer-specific configuration
Variants
Waste-disposal substructure Type AEU-4 ATEX
- Collection container, PE HD el 30 liters
- Drip tray 30 liters, material PE HD el
- Non-contact level measurement by means of pressure sensor with evaluation and 3-point display via 3 luminaires with acknowledgeable buzzer, integrated into the service panel of the fume cupboard, alternatively on the safety cabinet
- Safety cabinet Type 90 in accordance with EN 14470-1. W x D x H = 590 x 570 x 600 mm
- Pipe collector, approx. 8 HPLC hose connections possible or
- safety funnel with lid and table feed-through in the laboratory fume cupboard
- Optional: with continuous LED display
Waste-disposal substructure Type AEU-7 ATEX
- 2 collection containers, ea. 10 liters, PE HD el
- Drip tray 12 liters PE HD el
- Non-contact level measurement by means of pressure sensor with evaluation and 3-point display via 3 luminaires with acknowledgeable buzzer, integrated into the service panel of the fume cupboard, alternatively on the safety cabinet
- Safety cabinet, Type 90 in accordance with EN 14470-1. W x D x H = 590 x 570 x 600 mm
- Pipe collector, approx. 8 HPLC hose connections possible or
- safety funnel with lid and table feed-through in the laboratory fume cupboard
- Optional: with continuous LED display
Waste-disposal substructure Type AEU-8 ATEX
- 2 collection containers, ea. 10 liters, PE HD el
- Drip tray 12 liters– PE HD el
- Media-contacting float switch with one switching contact and electric fill-level control via 1 luminaire with acknowledgeable buzzer, integrated into the service panel of the fume cupboard, alternatively on the safety cabinet
- Safety cabinet, Type 90 in accordance with EN 14470-1. W x D x H = 590 x 570 x 600 mm
- Pipe collector, approx. 8 HPLC hose connections possible or
- safety funnel with lid and table feed-through in the laboratory fume cupboard
- Optional: with continuous LED display
LABbutler collection cart
- Compact and manoeuvrable
- For waste chemicals
- Made of acid and alkali-resistant PE HD el.
- 100 liter collecting tank
- 110 liter safety tank
- Integrated pump system