System DELTA 30 - Modular furnishing system Fume cupboard systems - experiment well in safety (for sure)

One of the most important pieces of safety equipment in laboratories is the fume cupboard.

In order to fulfill the protective function, and thus the maintenance of occupational safety, the exhaust air volume flow is a decisive criterion.  The retention of pollutants inside the fume cupboard and the resistance to external air currents that can interfere with the fume cupboard is highly dependent on the extraction volume. The further the sash is opened, the more the retention capacity of the fume cupboard is impaired.

Based on these considerations, DIN EN 14175 requires not only the static, but also the dynamic behaviour in the “robustness test” as proof. This simulates a disturbing movement in the room, in order to be able to evaluate the stability of the inflow and the retention potential of the fume cupboard. The DELTA 30 fume cupboards, with the extensive range of variants, meet the requirements of the DIN EN 14175 in in full with the best values. The exhaust system has optimized suction zones in the rear wall, which are easily disassembled for cleaning purposes, ensuring ideal air flow and ventilation. The interior of the fume cupboard is extensively usable. There are no disturbing built-in components. Optimal usage and maximum occupational safety – the evaluation factors for our fume cupboards.

DELTAguard Ex-fume cupboard - the reliable Sniffer

Product advantages

  • Certified according to Directive 2014/34/EU (ATEX)
  • Consistently performed conformity assessment procedure
  • For intended use in potentially explosive areas (within an EX-Zone 1 and 2) with the device category EX II 2(3) G
  • Effective sources of ignition are safely avoided by the design of the fume cupboard, so that explosive atmospheres cannot ignite
  • All large-scale components are electrically conductive or dissipative and connected to ground
  • For working with large quantities of solvents
  • Optional: Electrical service outlets  in EX-protected built-in housing
  • Optional: Aluminium duct with front control valves in EX-version
  • Optional: Substructure  with cabinet or hazardous substances cabinet in EX-version
  • Optional: Drip cup
  • Optional: Luminaire in EX-version
  • Variant: Total depth 1070 mm, usable depth 870 mm instead of 710 mm

Note: Separate types of fume cupboards are available for high thermal loads with acid digestions and the handling of unsealed radioactive substances

Do you need help?

Do you have any questions?

Please call us:
Mo-Fr, 7:30 - 17:00h:
+49 42 42 594 - 0


or send us an E-Mail:
info@wesemann.com